Equilibrium, Thermodynamic and Kinetic Studies on Adsorption of Zinc (II) From Solutions Using Different Low-Cost Adsorbents
Many industrial wastewaters contain numerous toxic metals such as zinc, which must be removed before reuse of the water or discharge into the environment. In this present study, unripe plantain peel activated carbon (UPPAC), pineapple peel activated carbon (PPAC) and commercial activated carbon (CAC) were utilized as low cost adsorbents for the removal of Zn (II) from aqueous solutions. Batch adsorption methodology was used to evaluate the effect of solution pH, initial metal ion concentration, adsorbent dose, contact time and temperature on adsorption. Scanning Electron Microscope (SEM) and Fourier Transform Infrared Spectrophotometer (FTIR) were used to characterize the adsorbents. The equilibrium isotherm data were analyzed using the Langmuir, Freundlich and Temkin isotherm model. The kinetic data were analyzed using the pseudo-first order, pseudo-second order equations, Elovich equation and intraparticle rate equation. Maximum adsorption of Zn (II) on UPPAC, PPAC and CAC (82.45%, 89.9% and 93.45%) was observed at pH 6 and pH 7. The adsorbed amount of Zn (II) increased with increase in contact time and reached equilibrium within 180 minutes. The maximum adsorption was found to be 200 mg/L in the studied range (200 – 1000 mg/L). The adsorption capacity and percent removal of Zn (II) were found to increase with increase in temperature. The Freundlich isotherm models provided the best fit to the experimental data for Zn (II) as indicated by the regression coefficient values (R2 > 0.97). The pseudo-second order equation gave the best fit to the experimental data for the metal ion (R2 > 0.99). Thermodynamic analysis showed a spontaneous adsorption process as negative values of ∆Go (-1.269 to -5.530) were obtained at all temperatures. The positive enthalpy change ∆Ho, 18.00, 20.46 and 23.45 kJ mol-1 for UPPAC, PPAC and CAC indicated an endothermic process. A highly disordered process was indicated by the positive entropy change ∆So.
Activated Carbon, Zn (II), Adsorption, Heavy Metals, Adsorption Kinetics, Adsorption Isotherms
[1]
Taha, S., Ricordel, S., Cisse, I., and Dorange, G. (2001). “Heavy metals removal by adsorption onto peanut husk carbon: characterization, kinetic study and modeling”, Separation and Purification Technology, Vol. 24, 389-401.
[2]
Guo, J., Qi, S., Yang, K., Yu, Z. and Wang, H. (2002). “Rice husk as a potentially low cost biosorbent for heavy metal and dye removal: an overview”, Materials Chemistry and Physics, Vol. 78, pp. 132-137.
[3]
Fenglian, F., and Wang Q. (2011). Removal of heavy metal ions from wastewater, Journal of Environmental Management, 92, 407-418.
[4]
USDHHS (1993). Toxicological profile for zinc, US Department of Health and Human Services, Agency for Toxic Substances and Disease Registry, Atlanta Geogia.
[5]
Walsh, T., Sandstead, H. T., Prasad, A. S., Newberne, P. M., and Fraker, P. J. (1994). “Zinc: health effects and research priorities for the 1990s”, Environmental Health Perspectives, vol. 102, pp. 5-46.
[6]
Khan, M. N., Wahab, M. F., (2006). Characterization of chemically modified corncobs and its application in the removal of metal ions from aqueous solution. J. Hazard Mater. B 141, pp 237–244.
[7]
Namasivayam, C., and Ranganathan, K. (1995). Removal of Pb (II), Cd (II), Ni (II) and Mixture of Metals ions by Adsorption onto ‘Waste’ Fe (III)/Cr (III) hydroxide and fixed bed studies. Environ. Technol. 16, 851 – 860.
[8]
Kannan, N., and Rengasamy, G. (2005). Comparison of cadmium ion adsorption on various activated carbons, Water Air Soil Pollut. 163, 185–201.
[9]
Alvarez-Ayuso, E. Garcia-Sanchez, A. and Querol, X. (2003). Purification of metal electroplating waste waters using zeolites, Water Research, 37, 4855-4862.
[10]
Uzoije A., Uche, C. C., and Ashiegbu, D. (2013). Analysis of Thermodynamics, kinetics and equilibrium isotherm on Fe3+/Fe2+ adsorption onto palm kernel shell activated carbon (PKSAC): A low-Cost adsorbent. American Chemical Science journal (ACSJ).
[11]
Tan, W. T., Ooi, S. T., and Lee, C. K. (1993). Removal of Chromium (VI) from solution by coconut husk and palm pressed fibers. Environmental Technology, 14, 277-282.
[12]
Dwivedi, C. P., Sahu, J. N., Mohanty, C. R., Raj Mohan, B., and Maikap, B.C. (2008). Column performance of granular activated carbon packed bed for Pb (II) removal. Journal of Hazardous Materials, 156 (1-3), 596-603.
[13]
Liang, S., Guo, X., Feng, N., and Tian, Q. (2010). Isotherms, kinetics and thermodynamic studies of adsorption of Cu2+ from aqueous solution by Mg2+/K+ orange peel adsorbents. J Hazard Mater; 174, 756–62.
[14]
Derylo-Marczewski, A. D, Blanchind, M, Marczewske, A. W, Swiatkoweri, A, and Tarasiuk, B. (2010). Adsorption selected herbicides from aqueous solution on activated carbon. J. Them Anal calorim 100, 785-794.
[15]
Joseph, Y. F, and Noursh, E.(2013). Performance, Kinetic and equilibrium in biosorption of anionic of saccharomyces cerevisiae as a low-cost biosorbent. Turkish J Eng. Evn. Sci. 37, 146-161.
[16]
Periasamy, K., and Namas, C. V. (1995). Removal of Ni (II) from aqueous solution and nickel industry wastewater using an agricultural waste: peanut hull, waste manage. 15, 54-63.
[17]
Shukla, A., Zhang, Y. H., Dubey, P., Margrave, J. L., and Shukla, S. S. (2002). The role of sawdust in the removal of unwanted material from water, J. Hazard. Mater; B95, 137-152.
[18]
Tsia, W. T., and Chen, H. R. (2010). Removal of malachite green from aqueous solution using low-cost charcoal based biomass. J. Hazard. Mater; 175, 844-849.
[19]
Hamadaoni, O., and Chiha, M. (2007). Removal of methylene blue from synthetic wastewater by wheat bran, Acta chim. Slov. 54, 407-418.
[20]
Meena, A. K., Mishra, G. K., Rai, P. K., Rajagopal, C., & Nagar, P. N. (2008) Removal of heavy metal ions from aqueous solutions using carbon aerogel as an adsorbent. Journal of Hazardous Materials, 150, 604-611.
[21]
Vaghetti, J. C. P., Lima, E. C., Rogers, B., Brasil, J. L., Dacunha, B. M., and Simon, N. M. (2008). Application of Brazilian-Pine fruit coat as biosorbent for removal of Cr (IV) from aqueous solution: kinetic and equilibrium study. Biochem Eng. J, 42, 67-76.
[22]
Allen, S. J., Mckay, G., and Porter, J. F. (2004). Adsorption isotherm models for basic dye adsorption by peat in single and binary component systems. Journal of Colloid Interface Science, 280, 322 – 333.
[23]
Anirudan, T. S., and Radhakrishnan P. G. (2008). Thermodynamic and kinetics of adsorption of Cu (II) from aqueous solution onto a new cation exchanger derived from tamarind fruit shell. J. Chem Thermodyn, 40, 702-709.
[24]
Adamson, A. W., and Gast, A. P. (1997). Physical Chemistry of Surfaces, sixth ed. Wiley-Interscience, New-York.
[25]
Aksu, Z., and Kutsal, T. (1991). A biosorption process for removing lead (II) ions from wastewater by using C. vulgaris. Journal of Chemical Technology and Biotechnology, 52, 109-118.
[26]
Brown, P. A., Gill, S. A., and Allen, S. J. (2000). Metal removal from wastewater using peat. Water Res., 34, 3907-3916.
[27]
Lakatos, J., Brown, S. D., and Snape, C. E. (2002). Coals as sorbent for the removal and reduction of hexavalent chromium from aqueous waste streams. Fuel, 81, 691-698.
[28]
Chen, Z., Ma, W., and Han, M. (2008). Biosorption of nickel and copper onto treated alga (undariapinnarlifida): application of isotherm and kinetic models. J Hazard Mater: 155, 327-333.
[29]
Bhattacharyya, K. G., and Sharma, A. (2005). Kinetics and thermodynamics of methylene blue adsorption on Neem (Azadirachta indica), Dyes Pigments 65, 51-59
[30]
Ho, Y. S. (2006). Second-order kinetic model for the biosorption of cadmium onto tree fern: a comparison of linear and non-linear methods. Water Research, 40, 119-125.
[31]
Ho, Y. S., and Mckay, G. (2000). The kinetics of biosorption of divalent metal ions onto sphagnum moss peat. Water research; 34, 735-742.
[32]
Ho, Y. S., and Mckay, G. (1998). Biosorption of dye from aqueous solution by peat. Chemical Engineering Journal, 70, 115-124.
[33]
Kumar, K. V. and Porkordi, K. (2007). Mass transfer, kinetics and equilibrium studies for the biosorption of methylene blue using Paspalum notatum. J. Hazard mater, 146, 214-226.
[34]
Ho, Y. S and Mckay, G. (2003). Removal of copper ions from aqueous solution by tree fern. Water Res, 37, 2323-2330.
[35]
Vadivelan, V. and Kumar, K. V. (2005). Equilibrium, kinetics, mechanism and process design for the sorption of methylene blue onto rice husk. Journal of colloid and interface science, 286, 90-100.
[36]
Mane, V. S., Mall, I. D., and Srivastava, V. C. (2007). Use of bagasse fly ash as an adsorbent for the removal of brilliant green dye from aqueous solution, Dyes Pigments. 73, 269-278.
[37]
Das, B., and Mondal, N. K. (2011). Calcerous soil as a new adsorbent to remove lead from aqueous solution: equilibrium, kinetic and thermodynamic study. Univ. J. environ Res Technol; 1 (4): 515-530.
[38]
Juang, R. S. and Chen, M. L. (1997). ‘Application of the Elovich Equation to the Kinetics of Metal Sorption with Solvent Impregnated Resins’, Ind Eng. Chem Res. 36, 813-820.
[39]
Dawodu, F. A. Akpomie, G. K., and Ejikeme, P. C. N. (2012). Equilibrium, Thermodynamic and Kinetic Studies on the Adsorption of lead (II) from Solution by “Agbani Clay”. Research Journal of Engineering Sciences, Vol. 1(6), 9-17.
[40]
Li, P. J., Ke, X., Zhou, Q. X., Zhang, Y. and Sun, T. H. (2006). Removal of heavy metals from a contaminated soil using tartaric acid. Journal of Environmental Science, China. 18, 727-733.
[41]
Prabakaran, R., and Arivoli, S. (2012). Adsorption kinetics, equilibrium and thermodynamic studies of Nickel adsorption onto Thespesia populnea bark as biosorbent from aqueous solutions. European journal of Applied Engineering and Scientific Research. 1 (4), 134-142.
